Land Rover Freelander How Remove Inicjator. West slope rover , oct 31, 2014 Turn the ignition on to position 2.
Service interval is now reset. How do you reset service light indicator land rover freelander 2. Resetting the service indicator on a land rover freelander 2 1:
Turn The Key (Towards The Front Of The Vehicle) To The Unlock Position Once, To Unlock The Vehicle.
How do you reset service light indicator land rover freelander 2. Dont release until it goes back to reading the milage. Forums > land rover forums > land rover freelander >.
Posted By Ross Davies On Jan 29, 2013.
Turn the ignition on to position 2. Service interval is now reset. Open bonnet (hood) depress the accelerator pedal simultaneously for ten seconds, release.
As You Will See We Break One In Our Attempt But We Sort.
After six minutes, enter the first number of the code. Keep the button held in and various different words will flash up on the little screen. Hi mate just dropped the tray on mine, at the front of tray it attches to the bumper with two screws and it also has two bolts that hold the front end on,just look up under the bumper where the front edge of tray is and you'll see them one eigher side,i removed the back bolts first then the scews then the front bolts i was.
Guangzhou Haoyang Auto Parts Co.,Ltd Established In 1998Th, Located In China’s Most Active Auto Parts Market.we Are Specialized In Importing And Exporting Of Auto Parts Products And Also Had 20 Years Experience In This Area.
Ad bearmach® are a supplier of parts & tools for land rovers and other offroad vehicles. West slope rover , oct 31, 2014 Removing the navigation screen heater controls radio etc.
Keep The Button Held In And Various Different Words Will Flash Up On The Little Screen.
A few days later repeat of problem. Generally you can either disconnect the battery long enough for the ecu to forget (this can take a couple hours, but can also cause issues with the remotes). Once this comes up release the button and it should be ok when you next cycle the ignition.
